Panasonic PT-LC76U, PT-LC56U manual Turning on the power

Turning on the power

Before turning on the power 1, Ensure that all components are connected properly.

2, Connect the accessory power cord. 3, Remove the lens cover.

POWER INPUT $

VIDEO RGB

&

power cord

#

&Press the input select button to select the input signal.

Input select	VIDEO	RGB
buttons

Changing	RGB1	RGB2	VIDEO	RGB1
signals
	S-VIDEO	VIDEO	S-VIDEO	RGB2

AUTO	MENU
SETUP

Power indicator

	ENTER
FREEZE		SHUTTER	)
	STD	(	*
VOLUME		D.ZOOM
	INDEX
	WINDOW
	PROJECTOR		'
		Lens cover

#Presspower.the MAIN POWER switch to turn on the

BThe power indicator on the projector will illuminate red.

$Press the POWER button.

BThe power indicator on the projector will flash green. After a short period, the indicator will illuminate green, and a picture will be projected.

%Turn on the power of all connected devices.

BStart the Play function of a device such as a DVD player.

NOTE:

BA tinkling sound may be heard while the power indicator is turned off, but this is not a sign of a malfunction.

BA picture will be projected in accordance with the selected input signal.

Follow the procedure below when you set the projector up first, and when	Operation
	Basic
you change the setup place.

' Adjusting the angle

BWhile pressing the adjuster buttons, adjust the forward/back angle of tilt of the projector.Adjust so that the projector is as vertical to the screen as possible.

(Press the AUTO SETUP button to initiate automatic positioning.

BThe tilt of the projector and the input
signal will be detected and keystone
distortion and the position of the	AUTO SETUP
image will be corrected.
(Refer to page 26 for details.)

) Adjusting the size

BTurn the zoom ring to adjust the size of the projected image.

* Adjusting the focus

BTurn the focus ring to adjust the focus of the projected image.

22-ENGLISH ENGLISH-23