Selecting a Trunked Zone and Talkgroup
Turn Zone Selector knob to appropriate trunked zone.
Sending a Trunked Call
1.Press PTT. If trunked system access was successful, the LED lights a steady red; if access was unsuccessful, the LED flashes red; a low pitched tone sounds.
2.Speak clearly into microphone. Release PTT to listen.
Initial PassPort System Registration
Upon power up, the display shows the PassPort alias: | PASSPORT |
HT1250•LS+ Radio
Quick Reference Card
(Check with your dealer for the features available with your radio.)
Record the functions for your radio’s programmable buttons in the table provided below. For further information, see pages 16 and 18 in this User’s Guide.
The display shows the selected talkgroup alias: | TLKGRP ALIAS |
If a PassPort site cannot be immediately located, the display | SEARCHING |
shows: |
|
On successful PassPort registration, the display shows: | REG SITE XXX |
(XXX = PassPort site on which you are registered). |
|
The display shows the Selected talkgroup alias: | TLKGRP ALIAS |
The alias remains on the display. |
|
Selecting a Conventional Zone and Channel
Turn Zone Selector knob to appropriate conventional zone.
Sending a Conventional Call
Press PTT and speak clearly into microphone. The LED lights a steady red while the call is being sent. Release PTT to listen.
Receiving a Trunked or Conventional Call
Turn Zone Selector knob to desired trunked or conventional zone. Make sure PTT is released. The LED flashes red when a call is received.
Making a Selective Call (LTR and Conventional Operation Only)
1.From Selective Call menu, select or enter desired radio ID number.
2.Press PTT to send the call. The radio sounds a continuous tone. Press PTT and talk; release PTT to listen.
Zone Selector Knob
On/Off Volume Knob
Side Button 1 (A)
(programmable)
Button
Side Button 2 (B) (programmable)
Side Button 3 (C) (programmable)
Top Button (D) (programmable)
LED Indicator
Microphone
Display
Menu Keys
(P1, P2, P3) (programmable)
Keypad
Receiving a Selective Call (LTR and Conventional Operation Only)
When a Selective Call is received, the radio displays Fand name or ID of calling radio; the LED flashes yellow. Press PTT to answer.
Button | Function | Short Press | Long Press | Hold Down | Page |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|