Motorola HT1250LS+ manual Deleting a Nuisance Channel or Talkgroup, Sys Scan Off?

Note: If you enter Menu mode while your radio is scanning, scanning stops. The radio resumes scanning when you exit Menu mode.

To start or stop a System Scan:

Press the preprogrammed Scan button (see page 22) to start or stop scanning,

–or–

Do the following:

1)to enter Menu mode.

2	+or ?until	System Scan
3	)to select	System Scan
	You see the current scan status.
4	+or ?until	Sys Scan On?
	–or–	Sys Scan Off?

5)to confirm your selection.

Notes:

•In conventional zones only, if there is activ- ity on a non-priority channel, the radio dis- connects the user from the current conversation and automatically switches to an active priority channel. This is indicated with a short alert tone.

•Your radio can either revert to a “selected” channel or the “last active” channel depending on its programming. For addi- tional details, contact your local dealer.

DELETING A NUISANCE CHANNEL OR TALKGROUP

Note: This feature is available only with PassPort Group Scan or System Scan operation.

If a talkgroup or channel continually generates unwanted calls (a “nuisance” channel), use the preprogrammed Scan button to temporarily delete the talkgroup or channel from the Scan list.

65

SCAN

English