Motorola HT1250LS+ manual Sending a Call Alert using the One-Touch Button, No Acknowledge

PASSPORT SIGNALING

5Press the PTT button to send the Call Alert.

•While the Call Alert is being established the Fblinks and the LED indicator flashes red momentarily.

6Once the Call Alert is received and acknowledged by the

target radio, the F	Acknowledge
displays solid and
you see:

Notes:

• If the Call Alert cannot be established,

you see: No Acknowledge

for 5 seconds. The LED indicator turns off.

•If all channels are busy while attempting a Call Alert,

you see: System Busy

48

and will hear a delayed busy tone as long as the PTT button is pressed.

If the PTT button is kept pressed and the system frees up a channel, the radio auto- matically attempts to re-establish the call.

•(to end the Call Alert and revert to talkgroup dispatch, or press the prepro- grammed Call Alert button. You can then manually re-initiate the call. (See Step 1.)

7(to end the Call Alert.

Sending a Call Alert using the One-Touch Button

1Press and hold the preprogrammed One- touch button.

•The LED indicator lights steady yellow.

•The display shows Fand the prepro- grammed alias or ID is displayed.

2The Call Alert is sent automatically.

•The LED indicator lights steady red. Note: Your radio sounds a continuous tone

(if programmed by your dealer).

English