Motorola HT1250LS+ Setting Tight or Normal Squelch, Setting the Power Level B, Sqlch Normal?

UTILITIES

SETTING TIGHT OR NORMAL SQUELCH

(CONVENTIONAL OPERATION ONLY)

Use this feature to filter out nuisance (unwanted) calls and/or background noise. However, tightening squelch could cause calls from remote locations to be filtered out as well. In this case, normal squelch may be more desired.

To select Tight or Normal Squelch:

Press the preprogrammed Squelch button (see page 20) to toggle between tight and normal squelch,

–or–

Do the following:

1)to enter Menu mode.

2	+or	?until	Utilities
3	) to select		Utilities
4	+or	?until	Squelch

90

5 )to select Squelch

6+or ?until Sqlch Tight?

–or–

until Sqlch Normal?

7)to confirm the selection.

SETTING THE POWER LEVEL B

Each channel in your radio has a predefined transmit power level that can be changed.

•High power (S) allows you to reach a radio that is farther away.

•Low power (R) conserves the battery’s charge.

•Auto power (Conventional operation only) automatically sets the optimal power level based on the strength of the signal received. If the received signal is weak, the transmit level will be set to high, and vice versa.

English