Motorola 6816101H01-A service manual Electromagnetic Interference/Compatibility

Page 7

v

Operating Instructions

•Transmit no more than the rated duty factor of 50% of the time. To transmit (talk), push the Push- To-Talk (PTT) button. To receive calls, release the PTT button. Transmitting 50% of the time, or less, is important because this radio generates measurable RF energy exposure only when transmitting (in terms of measuring for standards compliance).

•Hold the radio in a vertical position in front of the face with the microphone (and

other parts of the radio including the antenna) at least one inch (2.5 centimeters) away from the nose or lips.

•Antenna should be kept away from the eye. Keeping the radio at a proper distance is important since RF exposures decrease with increasing distance from the antenna.

•When worn on the body, always place the radio in a Motorola-approved clip, holder, holster, case, or body harness for this product. Using approved body-worn accessories is important because the use of non-Motorola-approved accessories may result in exposure levels, which exceed the FCC occupational/controlled environment RF exposure limits.

•If you are not using a body-worn accessory and are not using the radio in the intended use posi- tion in front of the face, ensure the antenna and the radio are kept at least one inch (2.5 centime- ters) from the body when transmitting. Keeping the radio at a proper distance is important because RF exposures decrease with increasing distance from the antenna.

Approved Accessories

•Use only Motorola-approved supplied or replacement antennas, batteries, and accessories. Use of Non-Motorola approved antennas, batteries, and accessories may exceed the FCC (IEEE) and ICNIRP RF exposure guidelines.

•For a list of Motorola-approved accessories, visit the following website, which lists approved accessories for your radio model: http://www.motorola.com/governmentandenterprise.

Additional Information

For additional information on exposure requirements or other training information, visit http://www.motorola.com/rfhealth.

Electromagnetic Interference/Compatibility

NOTE: Nearly every electronic device is susceptible to electromagnetic interference (EMI) if inadequately shielded, designed, or otherwise configured for electromagnetic compatibility.

Facilities

To avoid electromagnetic interference and/or compatibility conflicts, turn off your radio in any facility where posted notices instruct you to do so. Hospitals or health care facilities may be using equipment that is sensitive to external RF energy.

Aircraft

When instructed to do so, turn off your radio when on board an aircraft. Any use of a radio must be in accordance with applicable regulations per airline crew instructions.

Medical Devices

Pacemakers

The Advanced Medical Technology Association (AdvaMed) recommends that a minimum separation of 6 inches (15 centimeters) be maintained between a handheld wireless radio and a pacemaker. These recommendations are consistent with those of the U.S. Food and Drug Administration.

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Mag One by Motorola Radio Series Computer Software Copyrights Document History Page Federal Communication Commission FCC Regulations Safety InformationGuidelines Compliance with RF Exposure StandardsElectromagnetic Interference/Compatibility Use of communication devices while driving Operational WarningsHearing Aids Other Medical DevicesIntrinsically Safe Radio Information Operational CautionsOperational Cautions for Intrinsic Safe Equipment Repair Do Not Substitute Options or AccessoriesTable of Contents Glossary of Terms Radio ProgrammingScope of Manual Warranty and Service SupportWarranty Period and Return Instructions IntroductionFurther Assistance From Motorola After Warranty PeriodPiece Parts Technical SupportUnit Level Radio Model InformationCPS Radio FeaturesIntroduction MaintenancePreventive Maintenance Cleaning ProceduresSafe Handling of Cmos and Ldmos Devices Repair Procedures and Techniques General Disassembling and Reassembling the Radio General Radio Disassembly Detailed Radio Disassembly DetailedFront Cover from Chassis Disassembly Speaker Wire Radio Disassembly Detailed PC Board Disassembly Radio Reassembly DetailedPC Board Reassembly Chassis and Front Cover Reassembly Radio Reassembly Detailed Speaker Connector Part Name Qty Mechanical View and Parts ListExploded View and Parts List ReferenceReference Part Name Qty Reference Part Name Qty PMUD2221A PMNN4071RCMotorola Part Service AidsDescription Application Test Equipment Motorola Description Characteristics ApplicationProgramming Cable PMDN4043R Test Box PMDN4040R Cloning Cable PMDN4060R otesRadio Tuning Tuning Frequency Hardware Tuning Setup and ProcedureGround Contact Finger R425 R426 R216 FL701 R215 TP1 Subtone Level 42 ± 0.02kHz 96 ± 0.02kHz R425 R426 C722 Page Programming Your Radio Radio ProgrammingKit Number CPS ProgrammingCPS Programming Setup Factory ResetFactory Reset Accessories Service Kits Audio AccessoriesPublications LAH84JDC8AA4AN Model Chart and Test SpecificationVHF Band 1 Information 136-150 MHz A8 136-150 MHz VHF Model DescriptionReceiver SpecificationsGeneral TransmitterLAH84KDC8AA4AN VHF Band 2 Information 150 174 MHz A8 150-174 MHz VHFSpecifications LAH84QCC8AA4AN UHF Band 1 Information 403-425MHz A8 403-425 MHz UHFUHF UHF Band 2 Information 450 470MHz A8 450-470 MHz UHF Specifications LAH84TCC8AA4AN UHF Band 4 Information 490 512 MHz A8 490-512 MHz UHFPMAE4028A Specifications PLL ResetGlossary of Terms Term DefinitionVHF ROMTPL UHF
Top Page Image Contents