PALM TREO 650
Note: Please make sure you have the latest firmware upgrade for your phone. Go to the support section of the following website to check you have the latest version. You will need to register your device to download updates.
For Treo 650 go to www.palmone.com/au
a.ACTIVATING THE BLUETOOTH
You must activate the Bluetooth feature of your phone to establish a Bluetooth connection between your Pocket PC device and other Bluetooth devices.
1.Press the Home Button to bring up the main menu.
2.Tap the Bluetooth icon
2.Tap On.
b. PAIRING TO THE CELLULAR PHONE (not possible while charging)
14.Bring your phone to within about 20 cm from the Supertooth.
15.The Supertooth II is initially off. Turn it on by flipping up the Swivel Arm(1) to the 55º position. The Bluetooth Indicator(9) will glow (blue blink).
16.Simultaneously press the Reject Button(2) and the
Handsfree Pairing Mode.
17.On your phone Tap the Bluetooth icon at the top of the screen.
18.Tap Setup Devices. Tap
19.For Show Devices, Select All known devices
20.Your phone now searches for Bluetooth devices and will display them in the list.
21.Tap the name of the device, Supertooth, and then Tap OK.
22.Enter “0000” as the PassKey and then tap Done.
23.Tap Done to complete the process.
The Supertooth is paired with your Treo 650. An enabled Bluetooth icon will be seen on screen indicating that the Supertooth is linked.
c.ANSWERING/RECEIVING A CALL
When the phone is receiving a call, two dissimilar ring tones will be heard from the phone and then from the Supertooth.
4.When answering is done on the Supertooth (that is, pressing
5.When answering is done on the phone, ongoing call will be heard on the phone (not on the Supertooth). But if you wish to hear and transfer the audio to the Supertooth, just press the
6.To terminate the call, press down the
d.MAKING A CALL
Normal dialing
With your Phone you can make a call using different methods.
Please refer to your PC Phone’s User Guide.
51