SIEMENS S65 / S55, Pairing Mode | BlueAnt Wireless SUPERTOOTH II

SIEMENS S65 / S55

a.ACTIVATING THE BLUETOOTH

You must activate the Bluetooth feature of your cell phone to establish a Bluetooth connection between your mobile phone and other Bluetooth devices.

1.Press Menu button. Scroll to Setup, SELECT. Choose Connectivity, SELECT.

2.Scroll to Bluetooth, CHANGE. The phone is now connecting to the Bluetooth device. An icon will appear on the upper left corner when connected. Note: OPTIONS button may also be pressed. Choose Activate BT, then SELECT.

3.Continue pressing the On/Off/End Key to exit Menu.

b.PAIRING TO THE CELLULAR PHONE (not possible while charging the Handsfree Kit)

1.Bring the cellular phone at about 20 cm from the Handsfree Kit.

2.The Supertooth II is initially off. Turn it on by flipping up the Swivel Arm to the 55º position. The Bluetooth Indicator will glow (blue blink).

3.Simultaneously press the Reject Button and the Pick-Up/Hang-Up Button for about 10 seconds. A distinctive tone will be heard and the Bluetooth Indicator LED will change from blinking blue to alternate blinking red and blue. SuperTooth II is now in Handsfree

Pairing Mode.

4.Press Menu button. Scroll to Setup, SELECT. Choose Connectivity, SELECT. Scroll to Bluetooth, OPTIONS. Scroll to Search for…, press ACCESS button. The phone is now searching for devices. When the search is complete, Devices disc. is displayed as title.

If the device you are looking for is not on the list, repeat the procedure by pressing the OPTIONS and REPEAT buttons. Then press SELECT to add the device. The phone will initiate connection with the Handsfree Kit.

5.Pls. enter BT pin for… , OK. Enter “0000” as the BT pin then press OK. Handsfree trusted will be displayed afterwards indicating that the pairing is completed.

6.Continue pressing the On/Off/End Key to exit Menu.

The Handsfree Kit is paired and ready to use. An icon will be displayed during the standby mode indicating that the Handsfree Kit is linked with the phone.

c.ANSWERING/RECEIVING A CALL

When the phone is receiving a call, a ring tone will be heard from the phone.

1.Press the Pick-Up/Hang-Up Button once to answer the call.

2.End the call by pressing the Pick-Up/Hang-Up Button.

Note: Cell phone buttons can also be used to answer a call. To transfer the call to the Handsfree Kit, press the Pick-Up/Hang-UpButton once.

d.MAKING A CALL with the Handsfree Kit on

Normal dialing

1.Enter the contact number and send. This phone does not transfer calls to the Supertooth II automatically when making a call. After dialing, to transfer audio to the Supertooth II, press the Pick-Up/Hang-Up Button once.

2.Press the Pick-Up/Hang-Up Button to terminate the call.

Voice dialing

Refer to step h for the procedure when recording for voice dialing.

1.Press the Pick-Up/Hang-Up Button once to activate the voice dialing. 58