BlueAnt Wireless SUPERTOOTH II manual HANDSFREE pairing: Example, Pairing Mode

HANDSFREE pairing: (Example)

1.Bring the mobile phone to about 20cm from SuperTooth II.

2.The Supertooth II is initially off. Turn it on by flipping up the Swivel Arm to the 55º position. The Bluetooth Indicator will glow (blue blink).

3.Simultaneously press the Reject Button and the Pick-Up/Hang-Up Button for about 10 seconds. A distinctive tone will be heard and the Bluetooth Indicator LED will change from blinking blue to alternate blinking red and blue. SuperTooth II is now in Handsfree

Pairing Mode.

4.While the kit is in pairing mode, access the Bluetooth menu of your phone. (Kindly refer to your phone’s manual.) Turn on its Bluetooth function then execute a Bluetooth search so that it will be able to search and find your Supertooth II. When the phone displays the list of the Bluetooth devices it has found, select the name of this kit (Supertooth II).

5.When the phone asks for a passcode, enter “0000”.

6.Pairing is successful if the alternating red/blue lights of Bluetooth Indicator will stop and then change to plain blinking blue. Normally, the phone would also show briefly on its display if it’s already paired and connected to SuperTooth II or if pairing has failed.

Note: If pairing has failed, repeat the procedure. If pairing has succeeded, then your SuperTooth II kit is now ready to use. You can now make or answer a call using your kit instead of your phone.

9