BlueAnt Wireless SUPERTOOTH II SIEMENS SX1, a.ACTIVATING THE BLUETOOTH, Handsfree Pairing Mode

SIEMENS SX1

a.ACTIVATING THE BLUETOOTH

You must activate the Bluetooth feature of your mobile phone to establish Bluetooth connection between it and other Bluetooth devices.

1.Press Menu key Setup Bluetooth.

2. is highlighted. Press Options Change.

3.Choose On and press Ok.

4.Continue pressing until you finally Exit.

b.PAIRING TO THE CELLULAR PHONE (not possible charging the Handsfree Kit)

1.Bring the cellular phone at about 20 cm from the Hands-free Kit.

2.The Supertooth II is initially off. Turn it on by flipping up the Swivel Arm to the 55º position. The Bluetooth Indicator will glow (blue blink).

3.Simultaneously press the Reject Button and the Pick-Up/Hang-Up Button for about 10 seconds. A distinctive tone will be heard and the Bluetooth Indicator LED will change from blinking blue to alternate blinking red and blue. SuperTooth II is now in

Handsfree Pairing Mode.

3.Press Menu key Setup Bluetooth.

4. will be displayed.

5.Sway the joystick to the left to open Paired devices window.

6. Press succeedingly button for Options New paired device.

The phone will then start to search for other Bluetooth devices until it displays them in the list.

7.Select the device you want to connect with your phone.

8.Enter “0000” as the passcode and press OK.

9.Highlight the paired device, press Options and choose Connect. The statement “Connected to… “appears.

10.Continue pressing until you finally Exit.

The Hands-free Kit is paired and ready to use. Notes:

You only have to do the pairing process once for a particular phone. You will only redo the process if you want to pair it with another mobile phone.

If you turn-off your Hands-free kit, it will disconnect with your phone. If you turn it back on, just shortly press the Pick-Up/Hang-Up Button. A question, “Accept connection request from….? “will be displayed. Press Yes to reconnect.

60