Nortel Networks ICS 4.1 Restrn filters, Show filter, Deny, No overrides, Set restrns, Filters

Page 58

•• Restrn filters	These are sets or groups of restrictions and associated overrides that specify the external
	numbers or feature codes that cannot be dialed from a telephone or line.
••• Show filter:_	Enter the two-digit restriction filter number.
•••• Restrn 00	Filter 00 is pre-set with no restrictions.
•••• Restrn 01	First programmable restriction. For each filter, enter up to 48 restrictions.
••••• Deny	Enter the digits you wish to be restricted when this filter is used.
••••• No overrides	Enter the dialing sequences which are allowed to override this filter, if any.
•• Set restrns	Select restrictions for a specific set.
••• Filters	Select the restriction filters for a specific set.
•••• Normal	Enter the number (two-digit) of the restriction filter to apply during normal service and each of
	the schedules.
•••• Night
•••• Evening
•••• Lunch
•••• Sched 4
•••• Sched 5
•••• Sched 6
••• Set lock	Select the level of personal programming and customizing that can be performed at a
	telephone.
••• Allow last no	Select whether a telephone can use Last Number Redial (ÄÞ).
••• Allow saved no	Select whether a telephone can use Saved Number Redial (Äßà).
••• Allow link	Select whether a telephone can use Link (ÄàÚ) to access the features of a private
	branch exchange.
•• Line/set rstrns	Assign restriction filters to certain lines on each set in your system.
••• Show line:_	Select the line on this telephone for which the restriction will apply.
•••• Normal	For each line, enter the number (two-digit) of the restriction filter to apply during normal service
	and each of the schedules.
•••• Night
•••• Evening
•••• Lunch
•••• Sched 4
•••• Sched 5
•••• Sched 6
• Telco features	This programming section lets you program the way the Norstar system works with features and
	services that are based in the public network or other outside source, namely Call Display and
	an external voice message service.
•• CLASS assignment	In this programming section, you can assign CLASS services, such Call Display, in order to
	capture information about incoming and outgoing calls.

Compact ICS 4.1 Programming Record P0906186 Issue 02