Nortel Networks ICS 4.1 manual Caller ID set, Call log set, Extl VMsg set, 1stDisplay, Log space

	Page 59
••• Show line:_	Enter the number of the line for which the telephone will log Call Display information.
•••• Caller ID set	Select whether the telephone displays the Call Display information when a call is ringing on the
	specified external line.
•••• Call log set	Select whether the telephone will automatically log Call Display information for calls on the
	specified external line.
•••• Extl VMsg set	Select whether this telephone will display a message indicator provided to the specified line by
	an external voice message service.
••• 1stDisplay	Select call information to be displayed first: name of caller, number of caller, or name of line in
	your Norstar system that the call is on.
••• Log space	Allocate a number of Call log spaces from a system-wide pool of spaces to the telephone.
•••• Log: Pool:	Assign this telephone its log spaces.
Lines	A programming section that lets you assign settings to each line.
Show line:_	Enter the line number of the line you want to program.
• Trunk/Line data	The programming section that lets you program settings for physical lines and target lines that
	affect how the line is used by the Norstar system.
•• Trunk type	The trunk type is determined by the cartridge or card installed in the slot.
•• Line type	Select how a line will be used by telephones in the system. Choose Public to be able to assign
	the line to any telephone. Choose Private to make the line private to a telephone. Enter the DN
	of the telephone you want to assign the line. Choose Pool to place the line in a line pool (A to C).
•• Rec’d #	Enter the Received number for this target line. When the system automatically answers an
	incoming call on auto-answer Loopstart or BRI lines, it collects the number of digits specified by
	the Rec’d # length setting, matches these digits to a Received number, and routes the call to the
	appropriate target line. A Received number cannot be the same as, or be the start digits of a
	line pool access code, a destination code, the DISA DN, or the Auto DN.
•• Dial mode	Select the appropriate dial mode for the line. The dial mode you select here must match the dial
	mode setting of the line at the central office (the public network). The default is tone. This setting
	does not appear for target lines.
•• PrimeSet	Enter the DN of a prime telephone as a backup to answer calls on this line.
•• Auto privacy	Select whether a line will be private to the individual on a call, or whether it can be shared by
	other users while a call is in progress. The Privacy setting can be suspended for individual calls
	using the privacy feature (Ä¡Ü).
•• Trunk mode	Select whether the line operates with disconnect supervision. Auto answer and DISA lines must
	be supervised. This setting does not appear for target lines.
•• Ans mode	Select whether the line will be answered manually (normal call answering method) or
	automatically by the system. Auto answer allows remote access to your Norstar system. This
	setting only appears if Trunk mode is supervised.
•• Ans with DISA	Select whether a line programmed for auto answer will be answered with Direct Inward System
	Access (DISA) or with system dial tone. This setting only appears if Ans mode is Auto. This
	setting does not appear for target lines.
•• Aux. ringer	Select whether an auxiliary ringer (if installed) will ring for incoming calls on this specific line.
•• Full AutoHold	Select whether an idle line will be put on hold when another line is selected. This setting does
	not appear for target lines.
•• LossPkg	Select the appropriate loss/gain and impedance package for analog loop lines only. Select the
	package based on the terminating switch type (PBX or CO) and the distance from the switch
	(Short, Medium, or Long). This setting only appears if the line is on a loopstart cartridge. It does
	not appear for target lines.

P0906186 Issue 02 Compact ICS 4.1 Programming Record