Nortel Networks ICS 4.1 Ring grp, SchedNight, Service, Trunk answer, ExtraDial, Line settings

	Page 61
•••• Ring grp 01	Enter the valid ring group number from 01 to 20. All ring groups have DN 21 assigned to them.
••••• Show set:_	Enter the number of the set you wish to assign to this Ring group or use LIST to display the valid
	sets added to this Ring group.
•• Sched:Night	In this setting, you select options for your ringing service.
••• Service	Select how you want your service activated.
••• Trunk answer	Select Y (Yes) to allow you use the Trunk Answer feature (Ä¡ââ) to answer, from
	any telephone, an external call ringing at any other telephone in the system when ringing
	service is on.
••• ExtraDial	Enter the internal telephone number of the Extra-Dial telephone. This allows you to assign an
	additional Direct-dial telephone in the Norstar system for each schedule you use.
••• Line settings	Select ringing service options for each line.
•••• Show line:_	Enter a valid line number.
••••• Ring grp	Enter the line number of a pre-defined ring group between 01 and 20.
••••• Aux. ringer	Indicate whether the auxiliary ringer (if installed) also rings for this line when Ringing service is
	on.
•• Sched:Evening	Select the ringing service settings for each of these schedules as you have done for Night sched.
•• Sched:Lunch
•• Sched:Sched 4
•• Sched:Sched 5
•• Sched:Sched 6
• Restrn service	Programming section where you can select the method for activating alternate restrictions.
•• Sched:Night	In this section you can indicate how alternate call routing should be activated for each of the
	schedules.
••• Service	Select how you want your service activated.
•• Sched:Evening	Set up activation method for each of these schedules, as you have with Night sched.
•• Sched:Lunch
•• Sched:Sched 4
•• Sched:Sched 5
•• Sched:Sched 6
• Routing service	A programming section that lets you create up to 500 destination codes and 999 routes to
	provide a dialing plan or “least cost routing”.
•• Routes	Create the routes to be used when a destination code is dialed.
••• Show route:_	Enter the number of the route you want to create.
•••• DialOut	Enter the number (up to 24 digits or characters) you want this route to dial out (if required).
•••• Use	Select the line pool you want this route to use.
•• Dest codes	Define which routes are used when a destination code is dialed.

P0906186 Issue 02 Compact ICS 4.1 Programming Record