Nortel Networks ICS 4.1 SysID, Password Keys, Cd1-KSU, Card type, Discon timer, Loops, Type, TEIs

	Page 69
Software Keys	In this section, you can access optional features and services.
• SysID	This number can be viewed on any M7324 or M7310 telephone display. Record the number,
	which you will be asked to provide when you call the Nortel Customer Response Center.
• Password Keys	The keys are obtained by calling the Nortel Customer Response Center at 1-800-321-2649.
	The keys are required for some system expansion activities and to activate the remote
	monitoring capability.
•• Key 1	Enter the eight-digit password.
•• Key 2	Enter the eight-digit password.
•• Key 3	Enter the eight-digit password.
Hardware	In this section, you can view and configure the Trunk Cartridges and BRI Cards installed in the
	ICS.
• Cd1-KSU	Configure the cartridge or card that occupies the left-most slot in the ICS.
•• Card type	The display shows the current card type.
•• Lines	View the line-number range for the lines on an LS/DS or CI Analog Trunk Cartridge.
•• Discon timer	Specify the duration of an Open Switch Interval for an LS/DS or CI Analog Trunk Cartridge.
•• Loops	View the loops on this BRI Card.
•• Loop	View the settings for a particular loop on this BRI Card.
••• Type	View or change the loop type.
•••• Lines	View the lines on this loop (only for S, T, and U-NT loops).
••• No SPIDs assignd	Assign one or two service profile identifiers (SPIDs) as supplied by your service provider. SPID
	settings appear only for S, T, and U-NT loops.
••• SPID1	Enter the SPID supplied by your service provider.
••• # of B-channls	Select the number of B-channels that are associated with the SPID.
••• Network DNs	Enter the Network DNs that are associated with the SPID.
•••• Call type	Select the Call type used with the Network DN. For each Network DN, use only one of each of
	the Voice and Data call type settings, or a single Both call type setting.
••• SPID2	Enter the second SPID supplied by your service provider, if applicable.
••• D-packet srvce	Configure the D-packet service for this loop.
•••• D-packet srvc	Turn the D-packet service for this loop on or off.
•••• Lp201	Select the S-loop (for BRI-ST Card) or U-LT loop (for BRI-U2 or BRI-U4 Card) that supports the
	D-packet service.
•••• TEIs	Add up to eight Terminal Endpoint Identifiers (TEIs). Each TEI is supplied by your service
	provider and is associated with an ISDN device.
••••• No TEIs on loop	Enter the two-digit TEIs supplied by your service provider.
••• ONN blk	Determine the ONN blocking for BRI loops.
••• Sampling	Select the sampling used by an S loop.
••• DNs on Loop 201	Assign the ISDN DNs that use this S loop or U-LT loop.
•••• Assign DNs	Enter up to seven ISDN DNs for each S loop or U-LT loop.

P0906186 Issue 02 Compact ICS 4.1 Programming Record