USING THE LINE INTERFACE MODULE (5224 IP PHONE ONLY)
5224 IP Phones support the Mitel Line Interface Module. The Line Interface Module allows you to make and receive calls over an analog line (referred to as the Line Interface Module line) connected to your phone, and operates in either of the following two modes (as determined by your System Administrator):
•Line Interface Module mode: your phone allows you to use the Line Interface Module line at any time.
•Failover Mode: you can use the Line Interface Module line only when the IP connection has failed.
Note: Handsfree and
LINE INTERFACE MODULE MODE
Make A Call
To make a call using the Line Interface Module line:
1.Lift the handset.
2.Press the Line Interface Module key. ANALOG CALL appears on the display.
3.Dial the number to make the call.
Notes:
•When making external calls over the Line Interface Module line, a prefix (e.g. 9) is not required.
•If your phone's Line Interface Module key has the Privacy option enabled and another phone is on a call using the Line Interface Module line (that is, the Line Interface Module key is solid orange), you cannot access the Line Interface Module line. The user of the other phone must first hang up before you can access the Line Interface Module line.
•To determine whether the Privacy option is enabled, contact your System Administrator.
Answer A Call
To answer a call using the Line Interface Module line:
1.Lift the handset.
2.Press the flashing Line Interface Module key. ANALOG CALL appears on the display.
42