NEC 5224 manual Hot Desk Remote Logout, Tag Call

4. Press the Okay softkey.

To log out of Hot Desking 5224 IP Phone (the phone must be idle):

1.Press the HotDesk softkey.

2.Press the Logout softkey.

3.Press the Confirm softkey.

Note: Your profile can only be active on one phone at a time. If you log in from another phone without logging out from the first one, the system will automatically deactivate your profile on the first phone.

Hot Desk Remote Logout

A user who has forgotten to log out of a Hot Desking phone can be logged out using any phone that supports Hot Desk Remote Logout.

To remotely log out a Hot Desking phone:

1.Dial 111.

2.Dial the Hot Desk User Extension Number that you want to log out.

Tag Call

Tag Call allows you to signal that you are the victim of a threatening or malicious call. Using the tag, your system administrator or telephone company can identify the source of the call and provide this information to appropriate personnel or authorities. CAUTION: Tagging a non– malicious call may result in fines or other penalties.

To tag a malicious call:

•Press the Tag Call feature key while the call is in progress. See "Feature Keys" elsewhere in this guide for information on programming a Tag Call feature key to your phone. –OR–

•Press ( TRANS/CONF ) and dial *55.

If the call was successfully tagged "Thank You" is shown on the display; otherwise, "Not Allowed" is displayed. Note: Tag Call can be used on active two–party calls only. Calls on hold and conference calls cannot be tagged.

38