more information, contact your System Administrator.
To make an Emergency Call using the Line Interface Module line:
1.Lift the handset.
2.Press the Line Interface Module key that you have programmed. The set indicates IP FAIL: ANALOG CALL
3.Dial your Local Emergency Number.
To make an Emergency Call using the Line Interface Module line, when the IP connection has failed:
1.Lift the handset.
2.Press the Line Interface Module key that you have programmed. The set indicates IP FAIL: ANALOG CALL.
3.Dial your Local Emergency Number.
EMERGENCY CALLS WHEN EMERGENCY CALL ROUTING PROGRAMMED
Note: This procedure is in addition to the methods described above.
To make an Emergency Call if Emergency Call Routing is programmed:
1.Lift the handset.
2.Dial your Local Emergency Number (911 or equivalent).
For more information on using the Line Interface Module line, refer to Using the Line Interface Module.
Phonebook
To use Phonebook:
1.Press 
(SUPERKEY).
2.Press the Yes softkey when "Phonebook?" appears.
3.Enter the name of the desired party, as follows:
•For each letter in the name, press the appropriate key on the keypad until the letter is shown in the display. For example, if the letter C is required, press the digit 2 three times.
•Use the <— softkey to correct errors.
12