NEC 10930 95 Installing And Using a Headset, To set up a headset Feature Key, To use your headset

Installing And Using a Headset

To install an optional headset:

1.Plug the headset cord into the headset jack on the bot- tom of the telephone.

2.The headset cord routes through the upper channel on the right side of the telephone base.

To set up a headset Feature Key:

1.Dial #KP (#57).

2.Press the Feature Key you want to assign + HOLD.

3.Press INTERCOM.

–INTERCOM flashes (red).

4.Press a VOLUME key until you see HEADSET.

5.Press HOLD + SPEAKER twice to exit.

To turn the headset mode on and off:

1.Press your Headset Feature Key.

–The headset key is on while in the headset mode; off while in the normal handset mode.

–You can optionally dial #HS to turn the headset mode on and off.

To use your headset:

1.While in the headset mode, you can do the following:

–Press a line key to place or answer an outside call.

–Press INTERCOM to dial a co-worker on the Intercom.

–While on a call, press SPEAKER to hang up.

2.Keeping the above three things in mind, process calls normally using the convenience of a headset.

12