Feature setup

1.To enter feature setup mode, press and hold SETUP until the system announces “Voice is...”

2.Press SETUP repeatedly to hear each feature.

3.When you hear the feature you want to modify, press ANNC/SKIP or MEMO/REPEAT to change the setting.

4.Press PLAY/STOP to exit feature setup. The new settings will be saved.

When any feature is on, the message window displays .

When any feature is off, the message window displays .

Feature summary
FEATURE	SYSTEM	OPTIONS
	ANNOUNCE
LANGUAGE	“Voice is…”	• Choose English to have the system announce
		voice prompts in English.
		Choose Francais to have the system announce
		voice prompts in French.
		• During setup, the message window will display
		the current language setting (E for English and
		F for French).

RING SELECT	“Number of ring is…”	• Choose the number of times the telephone will
		ring before the system answers a call. You can
		set it between 2 and 7 rings, toll saver 2/4 or
		toll saver 4/6.
		• When set to toll saver 2/4, the system
		answers after four rings when there are no
		new messages, and after two rings when there
		are new messages. Toll saver 4/6 causes the
		system to answer after six rings when there
		are no new messages and after four rings
		when there are new messages.
		• D uring setup, the message window will
		display the number of rings (8 for toll saver
		2/4, or 9 for toll saver 4/6).

REMOTE	“Remote access code is…”	• Change the remote access code to any three
ACCESS CODE		digit number between 500 and 999.
		• The remote access code is preset to 500 and
		allows you to access many features of this
		answering system remotely from a touch tone
		telephone.
		• The three digits of the remote access code are
		set separately. The system will prompt you to
		set the second and third digits after setting the
		first digit. See Feature setup, above.