II Time Zone Setting | X-Micro Tech XWL-11GRTX manual

II Time Zone Setting

This page is used to enable and configure NTP client

Screen snapshot – Time Zone Settings

III LAN Interface Setup

This page is used to configure local area network IP address and subnet mask

Screen snapshot – LAN Interface Setup

11

Image 20

X-Micro Tech XWL-11GRTX user manual II Time Zone Setting, III LAN Interface Setup

Contents

Wlan 11g Broadband Router MAX. OUT Power Federal Communications Commission FCC Statement Copyright Disclaimer Table of Contents Frequently Asked Questions FAQ What is WMM? What is Wlan ACK TIMOUT? Terminology VPN 1Package contents 2Product Specifications Product Features Generic Router Panel Description Wlan LED WAN 1Hardware Installation 2Software Installation For OS of Microsoft Windows 95/ 98/ Me For OS of Microsoft Windows 2000, XP Connect to the X-Micro Wlan 11g Broadband Router For OS of Microsoft Windows NT ItemDescription Bssid Setup Wizard Operation Mode II Time Zone Setting III LAN Interface Setup IV WAN Interface Setup Wireless Basic Settings VI Wireless Security Setup Description Wireless Basic Settings Wireless Advanced Settings MAC address. Client Mode only System, Shared Key or Auto selection Wireless Security Setup Wlan IC of Realtek Characters. WPA, PersonalPre-Shared Key Only WEP Key Setup Wireless Access Control Click the Disabled , Allow Listed or Deny Listed WDS Settings WDS Security Setup II WDS AP TableWEP64bits, WEP128bits, Wpatkip WPA2AES or None Site Survey LAN Interface Setup Click to open the Active Dhcp Client Table window WAN Interface SetupInformation. Server mode only Static IP II Dhcp Client Server III PPPoE There are Continuous , Connect on Demand If you select the PPPoE and Connect on Demand IV Pptp Firewall Port Filtering Firewall IP Filtering Firewall MAC Filtering Firewall Port Forwarding Screen snapshot Firewall Port Forwarding Firewall URL Filtering Firewall DMZ VPN Setting Enable DMZ Click to enable the DMZ function Screen snapshot VPN Setup VPN Setup Edit Tunnel Mode only II Advanced IKE Setup Click to select DH1modp768 , DH2modp1024 or Received Packets Management StatisticsSent Packets Management Time Zone Setting Management Ddns Management Denial-of-Service Management Log Management Upgrade Firmware Management Save/ Reload Settings Management Password Setup Management WatchDog Management Quality of Service Screen snapshot Management Qaulity of Service Logout Bandwidth Control TableRemoved from the Current Bandwidth Control Addresses Current Bandwidth Control Table 1What and how to find my PC’s IP and MAC address? 2What is Wireless LAN?4How does wireless networking work? 3What are ISM bands? 5What is BSSID? 6What is ESSID? What is Fragment Threshold? 8What are the Open System and Shared Key authentications?9What is WEP? What is RTS Request To Send Threshold? What is Beacon Interval? What is Preamble Type? What is Ssid Broadcast?What is Wi-Fi Protected Access WPA? What is WPA2? What is 802.1x Authentication? What is Temporal Key Integrity Protocol TKIP?What is Advanced Encryption Standard AES? What is Inter-Access Point Protocol IAPP? What is Maximum Transmission Unit MTU Size? What is Clone MAC Address?What is DDNS? What is NTP Client? What is Wlan ACK TIMOUT? Example One PPPoE on the WAN Configure the WAN interface Configure the LAN interface Configure the Wlan interface Example Two Fixed IP on the WAN192.168.2.254 192.168.2.10 Configuration Example Two Fixed IP on the WAN Configure the WAN interface Configure the Wlan interface