| setup the connection through PPPoE protocol | |
| whenever you send the data packets out through the | |
| WAN interface; there are a watchdog implemented | |
| to close the PPPoE connection while there are no | |
| data sent out longer than the idle time set. | |
| Manual connection type means to setup the | |
| connection through the PPPoE protocol by clicking | |
| the Connect button manually, and clicking the | |
| Disconnect button manually. | |
Idle Time | If you select the PPPoE and Connect on Demand | |
| connection type, fill in the idle time for | |
| ||
| and 1000 minutes. | |
MTU Size | Fill in the mtu size of MTU Size. The default value is | |
| 1400. Refer to 4.23 What is Maximum Transmission | |
|
|
|
| Unit (MTU) Size? | |
Attain DNS | Click to select getting DNS address for PPPoE | |
Automatically | support. Please select Set DNS Manually if the | |
| PPPoE support is selected. | |
Set DNS Manually | Click to select getting DNS address for Static IP | |
| support. | |
DNS 1 | Fill in the IP address of Domain Name Server 1. | |
DNS 2 | Fill in the IP address of Domain Name Server 2. | |
DNS 3 | Fill in the IP address of Domain Name Server 3. | |
Clone MAC Address | Fill in the MAC address that is the MAC address to | |
| be cloned. Refer to 4.24 What is Clone MAC | |
| Address? | |
Enable uPNP | Click the checkbox to enable uPNP function. | |
| Refer to 4.22 What is Universal Plug and Play | |
| (uPNP)? | |
Enable Web Server | Click the checkbox to enable web configuration from | |
Access on WAN | WAN side. | |
Enable WAN Echo | Click the checkbox to enable WAN ICMP response. | |
Reply |
|
|
Set TTL value | Click to Enable and set Time to Live value. | |
Apply Changes | Click the Apply Changes button to complete the | |
| new configuration setting. | |
Reset | Click the Reset button to abort change and recover | |
| the previous configuration setting. | |
30
