X-Micro Tech XWL-11GRTX WAN Interface Setup, Click to open the Active Dhcp Client Table window

Subnet Mask	Fill in the subnet mask of LAN interfaces of this
	WLAN Access Point.
Default Gateway	Fill in the default gateway for LAN interfaces out
	going data packets.
DHCP	Click to select Disabled, Client or Server in
	different operation mode of wireless Access Point.
DHCP Client Range	Fill in the start IP address and end IP address to
	allocate a range of IP addresses; client with DHCP
	function set will be assigned an IP address from the
	range.
Show Client	Click to open the Active DHCP Client Table window
	that shows the active clients with their assigned IP
	address, MAC address and time expired
	information. [Server mode only]
DNS Server	Manual setup DNS server IP address.
Domain Name	Assign Domain Name and dispatch to DHCP clients.
	It is optional field.
802.1d Spanning	Select to enable or disable the IEEE 802.1d
Tree	Spanning Tree function from pull-down menu.
Clone MAC Address	Fill in the MAC address that is the MAC address to
	be cloned. Refer to 4.24 What is Clone MAC
	Address?
Apply Changes	Click the Apply Changes button to complete the
	new configuration setting.
Reset	Click the Reset button to abort change and recover
	the previous configuration setting.

3.3.11 WAN Interface Setup

This page is used to configure the parameters for wide area network that connects to the WAN port of your X-Micro WLAN 11g Broadband Router. Here you may change the access method to Static IP, DHCP, PPPoE or PPTP by click the item value of WAN Access Type.

25