X-Micro Tech XWL-11GRTX WDS Security Setup, II WDS AP Table, WEP64bits, WEP128bits, Wpatkip

Comment	Fill in the comment tag for the registered AP.
Apply Changes	Click the Apply Changes button to register the AP
	to new configuration setting.
Reset	Click the Reset button to abort change and recover
	the previous configuration setting.
Set Security	Click button to configure wireless security like
	WEP(64bits), WEP(128bits), WPA(TKIP),
	WPA2(AES) or None
Show Statistics	It shows the TX, RX packets, rate statistics
Delete Selected	Click to delete the selected clients that will be
	removed from the wireless distribution system.
Delete All	Click to delete all the registered APs from the
	wireless distribution system allowed list.
Reset	Click the Reset button to abort change and recover
	the previous configuration setting.

I WDS Security Setup

Requirement: Set [Wireless]->[Basic

Settings]->[Mode]->AP+WDS

This page is used to configure the wireless security between APs. Refer to 3.3.6 Wireless Security Setup.

Screen snapshot – WDS Security Setup

II WDS AP Table

This page is used to show WDS statistics

22