| transmission. |
| Refer to 4.13 What is Preamble Type? |
Broadcast SSID | Click to enable or disable the SSID broadcast |
| function. |
| Refer to 4.14 What is SSID Broadcast? |
IAPP | Click to enable or disable the IAPP function. |
| Refer to 4.20 What is |
| Protocol(IAPP)? |
802.11g Protection | Protect 802.11b user. |
RF Output Power | To adjust transmission power level. |
Turbo Mode | Click to Enable/Disable turbo mode.(Only apply to |
| WLAN IC of Realtek). |
Block Relay Between | Click Enabled/Disabled to decide if blocking relay |
Clients | packets between clients. |
WMM | Click Enabled/Disabled to init WMM feature. |
ACK Timeout | Set ACK timeout value. It shows current time in the |
| end. |
Apply Changes | Click the Apply Changes button to complete the |
| new configuration setting. |
Reset | Click the Reset button to abort change and recover |
| the previous configuration setting. |
3.3.6 Wireless - Security Setup
This page allows you setup the wireless security. Turn on WEP, WPA, WPA2 by using encryption keys could prevent any unauthorized access to your wireless network.
Screen snapshot – Wireless Security Setup
17
