2 Installation
2.1Hardware Installation
Step 1: Place the Wireless LAN Broadband Router to the best optimum transmission location. The best transmission location for your X-Micro WLAN 11g Broadband Router is usually at the geographic center of your wireless network, with line of sign to all of your mobile stations.
Step 2: Connect the X-Micro WLAN 11g Broadband Router to your wired network. Connect the Ethernet WAN interface of X-Micro WLAN 11g Broadband Router by category 5 Ethernet cable to your switch/ hub/ xDSL modem or cable modem. A straight-through Ethernet cable with appropriate cable length is needed.
Step 3: Supply DC power to the X-Micro WLAN 11g Broadband Router. Use only the AC/DC power adapter supplied with the X-Micro WLAN 11g Broadband Router; it may occur damage by using a different type of power adapter.
The hardware installation finished.
2.2Software Installation
¾There are no software drivers, patches or utilities installation needed, but only the configuration setting. Please refer to chapter 3 for software configuration.
Notice: It will take about 55 seconds to complete the boot up sequence after powered on the X-Micro WLAN 11g Broadband Router; Power LED will be active, and after that the WLAN Activity LED will be flashing to show the WLAN interface is enabled and working now.
5
