You can also press and hold the digit button of the speed dial number if you have assigned one. To store the speed dial number, see Storing a Number for Speed Dialing on page 7-14.
5. Press Start.
6. When a document is placed on the document glass, the display shows “Another Page?” on the top line after the document is scanned into the memory. If you have the next page, remove the scanned page and place the next page on the glass. Press the scroll button ( or ) to display "Yes" and press Enter. Repeat as necessary.
7-7
Enter the remote fax phone number using the number keypad.
4.
If you need to change the brightness, see Lighten/Darken on page 7-2.

7 Faxing

The document types recommended for the resolution settings are described in the table below:

Mode

Recommended for:

 

 

Standard

Documents with normal sized characters.

 

 

Fine

Documents containing small characters or thin lines or

 

documents printed using a dot-matrix printer.

 

 

Super Fine

Documents containing extremely fine detail. Super Fine mode

 

is enabled only if the machine with which you are

 

communicating also supports the Super Fine resolution. See

 

the notes below.

 

 

Photo

Documents containing shades of gray or photographs.

 

 

Color

Documents with colors. Sending a color fax is only possible if

 

the receiving machine supports color fax reception and you

 

send the fax manually. In this mode, memory transmission is

 

not available.

 

 

NOTE: For memory transmission, Super Fine mode is not available. The resolution setting is automatically changed to Fine.

When your machine is set to Super Fine resolution and the receiving fax machine does not support Super Fine resolution, the machine transmits using the highest resolution mode supported by the other fax machine.

Sending a Fax Automatically

1.Load the document(s) face up into the ADF, or place a single document face down on the document glass.

For details about loading a document, see Loading a Document on page 7-5.

2.Press the Fax button.

3.Adjust the document resolution to suit your fax needs (see Adjusting the Document Resolution on page 7-6).

Xerox PE220

Page 127
Image 127
Xerox PE220 manual Sending a Fax Automatically, Mode Recommended for