Xerox PE220 manual Replacing the Smart Kit Print Cartridge, Setting the Notify Toner Option

8 Maintenance

2. Pull the print cartridge out and remove it from the printer.

3. Gently shake the print cartridge from side to side five or six times to redistribute the toner.

NOTE: If toner gets on your clothing, wipe it off with a dry cloth and wash clothing in cold water. Hot water sets toner into fabric.

CAUTION: Do not touch the green underside of the print cartridge.

Use the handle on the cartridge to avoid touching this area.

4.Reinstall the cartridge and close the front door. Make sure that the cover is securely closed. If it is not firmly closed, printing error may occur.

Replacing the Smart Kit ® Print Cartridge

When the display on the control panel shows the warning message, “Toner Empty” the print cartridge has run and the machine stops printing. At this stage, the print cartridges needs to be replaced.

Remove the old print cartridge and install a new print cartridge. See Installing the Smart Kit ® Print Cartridge on page 2-4.

Setting the Notify Toner Option

If you set the Notify Toner menu option to “On”, your machine automatically sends a fax to your service agent or the dealer to notify them. The fax number can be preset by your service agent or dealer when the machine is installed.

The machine sends out a notification when:

•The print cartridge is low.

•A critical error occurred at your machine.

(Error cases: CRU Fuse Error, Low Heat Error, LSU Error.)

•Notification day and notification pages that are preset by your dealer have passed.

Xerox PE220 8-7