Xerox PE220 manual Installing Printer Software, System Requirements

2 Getting Started

Installing Printer Software

NOTE: You must install software using the supplied CD-ROM after you have set up your machine and connected it to your computer. For details, see Chapter 5, Printing.

The CD-ROM provides you with the following software:

Programs for Windows

To use your machine as a printer and scanner in Windows, you must install the MFP driver. You can install some or all the following components:

•Printer driver- Use this driver to take full advantage of your printer’s features.

•Scan driver- TWAIN and Windows Image Acquisition (WIA) driver is available for scanning documents on your machine.

•ControlCentre- Use this program to create phonebook entries and configure the destination of the scan button. You can also update the firmware of the machine.

Macintosh Driver

You can print and scan to and from Macintosh operating systems using your machine.

Linux Driver

You can print and scan to and from Linux operating systems using your machine.

System Requirements

Your machine supports following operating system.

Windows 98/Me/NT 4.0/2000/XP

The following table shows Windows requirements.

Item	Requirements		Recommended
CPU	Windows 98/Me/NT	Pentium II 400 MHz or	Pentium III 933
	4.0/2000	higher	MHz
	Windows XP	Pentium III 933 MHz or	Pentium IV 1
		higher	GHz
RAM	Windows 98/Me/NT	64 MB or higher	128 MB
	4.0/2000
	Windows XP	128 MB or higher	256 MB

2-12 Xerox PE220