Xerox PE220 manual Setting Up the Fax System, Changing the Fax Setup options, Option Description

7 Faxing

Setting Up the Fax System

Changing the Fax Setup options

1.Press Menu until “Fax Setup” appears on the top line of the display.

The first available menu item, “Default-Change”, displays on the bottom line.

2.Press the scroll button ( or ) until you see the desired menu item on the bottom line and press Enter.

3.If you select “Default-Change”, you will see “Resolution”. Press Enter again.

4.Use the scroll button ( or ) to find the desired status or use the number keypad to enter the value for the option you have selected.

5.Press Enter to make your selection. The next Fax Setup option appears.

6.If necessary, repeat steps 2 through 4.

7.To return to Standby mode, press Stop/Clear.

Available Fax Setup Options

Option	Description
Default-Change	You can change the default resolution value.
	Standard for documents with normal sized characters.
	Fine for documents containing small characters or thin
	lines, or for sending documents printed using a dot-matrix
	printer.
	Super Fine for documents containing extremely fine detail.
	Super Fine mode is enabled only if the remote machine
	also supports Super Fine resolution.
	Photo for documents containing shades of gray or
	photographs.
	Color for documents with colors. Sending a color fax is only
	possible if the receiving machine supports color fax
	reception and you send the fax manually. In this mode,
	memory transmission is not available.
Ring To Answer	You can specify the number of times the machine rings,
	from 1 to 7, before answering an incoming call.
Lighten/Darken	You can select the default contrast mode to fax your
	documents lighter or darker.
	Lighten works well with dark print.
	Normal works well with standard typed or printed
	documents.
	Darken works well with light print or faint pencil markings.

7-2 Xerox PE220