Redialing the Last Number
To redial the number you last called: Press Redial/Pause.
When a document is loaded in the ADF (Automatic Document Feeder; see To fax a document using the Automatic Document Feeder (ADF): on page 7-5), the machine automatically begins to send.
For a document placed on the document glass, the display asks if you want to load another page. To add more documents, press the scroll button ( or ) to display "Yes" and press Enter. To send the fax immediately, press the scroll button ( or ) to display "No" and press Enter.
Xerox PE220
Stop/Clear at any time
NOTE: When you want to cancel a fax job, press while sending.
You can also press and hold the digit button of the speed dial number if you have assigned one. To store the speed dial number, see Storing a Number for Speed Dialing on page 7.14.
6. When you hear a high-pitched fax signal from the remote fax machine, press Start.
Press Manual Dial. You hear a dial tone.
Enter the receiving fax machine’s number using the number keypad.
4.
5.
After all of the pages are scanned, press the scroll button ( or ) to display "No" and press Enter when the display shows "Another Page?".
7. The number is dialed and then the machine begins sending the fax when the receiving fax machine is ready.
NOTE: When you want to cancel a fax job, press Stop/Clear at any time while sending.
Sending a Fax Manually
1. Load the document(s) face up into the ADF, or place a single document face down on the document glass.
For details about loading a document, see Loading a Document on page 7-5.
2. Press the Fax button
3. Adjust the document resolution to suit your fax needs, see Adjusting the Document Resolution on page 7-6.
If you need to change the brightness, see Lighten/Darken on page 7-2.
