Xerox PE220 manual Confirming Transmission, Automatic Redialing

7 Faxing

Confirming Transmission

When the last page of your document has been sent successfully, the machine beeps and returns to Standby mode.

If your fax fails, an error message appears on the display. For a list of error messages and their meanings, see Clearing LCD Error Messages on page 9-8.

If you receive an error message, press Stop/Clear to clear the message and try to send the document again.

You can set your machine to print a confirmation report automatically each time sending a fax is completed. For further details, see the MSG Confirm item on MSG Confirm on page 7-3.

Automatic Redialing

When the number you have dialed is busy or there is no answer when you send a fax, the machine automatically redials the number every three minutes, up to seven times according to the factory default settings.

When the display shows “Retry Redial?”, press Enter to redial the number without waiting. To cancel the automatic redialing, press Stop/Clear.

To change the time interval between redials and the number of redial attempts. See Redial Term on page 7-3.

Xerox PE220 7-9