Xerox PE220 manual Range from 0 to 9. See Receiving Manually Using an

7 Faxing

Option	Description
Redial Term	Your machine can automatically redial a remote fax
	machine if it was busy. Intervals from 1 to 15 minutes can
	be entered.
Redials	You can specify the number of redial attempts, from 1 to 13.
MSG Confirm	You can set your machine to print a report showing whether
	a transmission was successful, how many pages were sent,
	and more. The available options are On, Off, and On-Err,
	which prints only when a transmission is not successful.
Image TCR	You can prevent the Image TCR (Transmission
	Confirmation Report) from being included in the
	confirmation report for privacy or security protection. The
	available options are On or Off.
Auto Report	This produces a report with detailed information about the
	previous 50 communications operations, including time and
	dates. The available options are On or Off.
Auto Reduction	When receiving a document containing pages as long as or
	longer than the paper loaded in the tray, the machine can
	reduce the size of the document to fit the size of the paper
	loaded in the machine. Select On if you want to
	automatically reduce an incoming page.
	With this feature set to Off, the machine cannot reduce the
	document to fit onto one page. The document will be
	divided and printed in actual size on two or more pages.
Discard Size	When receiving a document containing pages as long as or
	longer than the paper installed in your machine, you can set
	the machine to discard any excess at the bottom of the
	page. If the received page is outside the margin you set, it
	will print in actual size on two or more sheets of paper.
	When the document is outside the margin and the Auto
	Reduction feature is turned on, the machine reduces the
	document to fit it onto the appropriately-sized paper and
	discard does not occur. If the Auto Reduction feature is
	turned off or fails, data outside the margin will be discarded.
	Settings range from 0 to 30 mm.
Receive Code	The Receive Start Code allows you to initiate fax reception
	from an extension phone plugged into the EXT. jack on the
	back of the machine. If you pick up the extension phone
	and hear fax tones, enter the Receive Start Code. The
	Receive Start Code is preset to *9* at the factory. Settings
	range from 0 to 9. See Receiving Manually Using an
	Extension Telephone on page 7-12for more information
	about using the code.

Xerox PE220 7-3