Xerox PE220 manual Redistributing Print Cartridge Toner on, Stop/Clear button

		9 Troubleshooting
Display	Meaning	Suggested Solutions
Remove Documents	The Favorite Copy	The Clone, Autofit, ID Card
from ADF	button is set to Clone,	Copy or Poster feature does not
	Autofit, ID Card Copy or	work with ADF. Remove the
	Poster and you press	documents in the ADF.
	the button.
Retry Redial?	The machine is waiting	You can press Enter to
	for a specified time	immediately redial, or Stop/
	interval to redial a	Clear to cancel the redial
	previously busy station.	operation.
Scanner Locked	The scanner module is	Unplug the power cord and plug
Unlock Scanner	locked.	it back in.
Stop Pressed	The Stop/Clear button	Try again.
	has been pressed
	during a copy or fax
	operation.
Toner Empty	The print cartridge has	Replace the print cartridge with
	run out.	a new one. See Replacing the
		Smart Kit ® Print Cartridge
		on page 8-7.
		Note: A used cartridge will not
		reset this message.
Toner Low	The toner is almost	Take out the print cartridge and
	empty.	gently shake it. By doing this,
		you can temporarily re-establish
		printing operations. See
		Redistributing Print Cartridge
		Toner on page 8-6.
Non-Xerox	You have used an	You must use a Xerox approved
Cartridge	unauthorized cartridge.	cartridge.
	If you use a non-Xerox
	cartridge, the machine
	does not print.

Xerox PE220 9-11