Xerox PE220 manual Transparencies

10 Specifications

–To prevent serious jams, always load one sheet of paper at a time to print labels.

–Never print on the same sheet of labels more than once and never print on a partial sheet of labels.

When selecting labels, consider the quality of each component:

•Adhesives: The adhesive material should be stable at 180°C (356°F), the machine’s fusing temperature.

•Arrangement: Only use labels with no exposed backing between them. Labels can peel off sheets with spaces between the labels, causing serious jams.

•Curl: Prior to printing, labels must lie flat with no more than 5 in. (13 mm) of curl in any direction.

•Condition: Do not use labels with wrinkles, bubbles or other indications of separation.

Transparencies

Transparencies used in the machine must be able to withstand 180°C (356°F), the machine’s fusing temperature.+

NOTE: Load only 1 transparency at a time.

CAUTION: To avoid damaging the machine, use only transparencies recommended for use in laser printers.

10-12 Xerox PE220