Xerox PE220 manual Installing the Smart Kit Print Cartridge

2 Getting Started

Installing the Smart Kit ® Print Cartridge

1.Open the front door.

2. Remove the Smart Kit ®

Print Cartridge from it’s bag and remove the paper protecting the cartridge by pulling the packing tape.

3.Gently rock the cartridge 5 or 6 times to

distribute the toner. This will loosen the toner and make sure that you get the maximum copies from the cartridge.

NOTE: If toner gets on your clothing, wipe it off with a dry cloth and wash clothing in cold water. Hot water sets toner into fabric.

CAUTION: To prevent damage, do not expose the Smart Kit ® Print Cartridge to light for more than a few minutes. Cover it with a piece of paper if left exposed for more than a few minutes.

CAUTION: Do not touch the green underside of the Smart Kit ® Print Cartridge. Use the handle on the cartridge when lifting the cartridge to avoid touching this area.

2-4 Xerox PE220