AT&T 7314H, 7317H, 7315H, 7313H, 7316H manual Internal Automatic Answer int-aut-an

Internal Automatic Answer (int-aut-an)

To answer internal calls	1	Press int-aut-an
automatically		Note: Pressing int-aut-anhas no affect on an active
		call.
	2	An internal call is received

Note: If you have an IAA call in progress, and your voice terminal has an idle line preference (second call appearance is

reserved for outgoing calls), subsequent callers will receive a busy signal.

To answer a second internal call while an IAA call is in progress

Distinctive tone burst is sent, via the speaker or headset, and then the call is automatically answered

Speakerphone and microphone are automatically activated

Note: You can press Microphone to turn the microphone off (while on a call) for privacy or you can lift the handset after the call is automatically answered.

1Place the first call on hold, and answer the second call

Note: The second call will not be automatically answered.

To answer a second	1 Complete the first call
internal call while an IAA	Distinctive tone burst is sent, via the speaker or
call is in progress, and a
	headset, and the next call (waiting in queue) is
hunt group has been
	automatically answered
administered
	Note: A hunt group queue lamp can be administered
	to indicate that a call is waiting.
To cancel internal	1 Press int-aut-anagain
automatic answer

21