SET UP SYSTEM FEATURES
Feature Setup
You can set up one feature at a time, or you can set up a feature and then move on to set up another feature. After you change one feature, use the softkey to select OK to move to another feature. If you change only one feature, you can continue to select OK until the screen exits the Feature Setup mode.
NOTE: If the unit does not receive a command within 30 seconds, it automatically exits the Feature Setup mode.
Set the Time and Date
The system automatically resets the time and date each time new call information is received. However, you must manually set the time and date once for the day announced with your messages to be correct.
1Press o.
2Use the softkey to select CLOCK.
3Press Cor cto change the hour setting.
4Select NEXT to move to the minutes setting.
5Press Cor cto change the minutes setting.
6Select NEXT to move to AM or PM.
7Press Cor cto change the setting.
8Select DONE.
9Press Cor cto change the month setting.
10Select NEXT to move to the day setting.
11Press Cor cto change the day setting.
12Select NEXT to move to the year setting.
13Press Cor cto change the year setting.
14Select DONE.
NOTE: You can select DONE to exit without changing a setting.
8