SET UP SYSTEM FEATURES
Announcement Monitor
This system comes set to On so you can hear your announcement when the system answers a call. You can reset the system so you won’t hear the announcement.
1Press o.
2Use the softkey to select ANS SYS.
3Select OK until the screen displays Announce Monitor.
4Select CHANGE or press Cor cto change the setting to On or Off.
5Select OK.
Caller ID Feature Setup
Turn Caller ID with Call Waiting On or Off
If you don’t want the system to display call information about Call Waiting calls, you can turn this feature off.
1Press o.
2Press C.
3Use the softkey to select CALL ID. The screen displays Caller ID on Call Waiting.
4Select CHANGE or press Cor cto turn the feature On or Off.
5Select OK.
Programming Area Codes
Home and Local Area codes must be programmed into the unit to allow it to properly recognize and dial calls from the Caller ID call history (when using the Display Dial feature). By programming these specific area codes, the unit will be able to distinguish a local call from a long distance call, and will thereby dial the appropriate number of digits.
Home Area Code Guidelines
Most users simply dial the seven digits of a phone number to make a call within their Home Area Code and 11 digits outside of their Home Area Code. If this applies to you, you should program your Home Area Code into the unit. After programming, if you receive a call from within your Home Area Code, the screen will display the seven digits of the phone number. When you use Display Dial, the unit will know to ignore the Home Area Code, and dial only the seven digits of the phone number.
11