AT&T 1760 Delete Messages, Record Announcement, Record a Memo, Room Monitor with Intercom

Page 22

ANSWERING SYSTEM OPERATION

FROM A REMOTE TOUCH TONE PHONE

Delete Messages

Delete All Messages

1Connect with the answering system

2After you have listened to all messages and heard the two beeps, press 33. All messages are deleted. (If you haven’t listened to messages, you will hear an error tone, and the messages will not be deleted.)

Delete Selected Message

Press 3while the message is playing.

Record Announcement

1Connect with the answering system.

2Press 7*.

3Speak after the beep, then press 5to stop recording. The system replays your new announcement.

To review your announcement — Press 71.

Record a Memo

1Connect with the answering system.

2Press #and begin speaking after the beep.

3Press 5when you are finished.

Room Monitor with Intercom

You can call the answering system and listen to any activity in the room.

1Connect with the answering system.

2Press 98to listen for 30 seconds.

3If you wish, you can press 8while the monitor is active to speak to someone in the room (up to 30 seconds).

4Press 8again during intercom operation to return to listening only.

5Press 5or #at any time to exit Room Monitor with Intercom.

19

Image 22
Contents Digital Answering System with Caller ID/Call Waiting Advanced American Telephones. All rights reserved Page Contents Page Buttons and Screen Indicators Table/Desk Installation InstallationAbout Softkeys Select Display Language Connect the power cordInitialization Store Home Area CodeSet the Clock Adjust Display ContrastSet Dial Mode Set the DateInstallation Wall InstallationFeature Setup SET UP System FeaturesSet the Time and Date Delete Outgoing Announcement Answering System Feature SetupRecord Outgoing Announcement Review Outgoing AnnouncementRemote Access Code Ring Select and Toll SaverTurn Caller ID with Call Waiting On or Off Caller ID Feature SetupAnnouncement Monitor Programming Area CodesLocal Area Code Guidelines Home Area CodeLocal Area Codes Blocked Call InformationSet Display Screen Language Set Dial ModeSet Display Contrast Answering System Operation Listening to Your Messages Recording a Memo When Memory is FullDeleting Messages Deleting All MessagesPlay Messages Connect with the Answering SystemConnect with the answering system Record a Memo Delete MessagesRecord Announcement Room Monitor with IntercomTurn System Off Ending the Remote Access CallChanging Remote Access Code Turn System OnCaller ID Operation Call WaitingRemoving Call Records from History NEW Call LightReviewing Call History Display DialMaking a Display Dial Call Display Dial OptionsDisplay Messages Unknown CallerCase of Difficulty NEW Call Light Remains On System Does Not Respond to Remote CommandsPower Failure Recovery Screen is FlashingTemplate for Wall Mounting Use two #4 screwsRemote Commands To connect with your answering systemONE KEY Remote Commands