Local Area Code Guidelines, Home Area Code

SET UP SYSTEM FEATURES

You may, however, live in a region where for calls within your Home Area Code, you must dial 10 digits (that is, the three-digit area code and the seven digits of the phone number) or even 11 digits (“1” plus the area code and phone number). If this applies to you, program “000” instead of your Home Area Code into the unit. After programming, if you receive a call from within your Home Area Code, the screen displays the 10 digits of the phone number. When you use Display Dial, the unit will know to dial your Home Area Code along with the seven digits of the telephone number (and “1” if appropriate).

Local Area Code Guidelines

Most users dial 11 digits to make calls outside their Home Area Code. These users do not need to program any Local Area Codes.

However, if you dial only 10 digits to make calls to some areas outside your Home Area Code (without dialing “1”), then program these Local Area Codes into the unit (up to four codes can be programmed). After programming, if you receive a call from one of these Local Area Codes, the screen displays the 10 digits of the phone number. When you use Display Dial, the unit will know to dial the 10 digits, without inserting a “1”before the area code.

Home Area Code

1Press o.

2Press C.

3Use the softkey to select CALL ID.

4Select OK until the screen displays Home Area Code.

5Press Cor cto change the first digit.

6Select NEXT to move to the second digit.

7Press Cor cto change the second digit.

8Select NEXT to move to the third digit.

9Press Cor cto change the third digit.

10Select OK.