Press @PROG/CHAN to begin programming
Press V or ^to display features one by one
Press SELECT to modify a displayed feature
To stop at any time, press O
Telephone Operation
Customizing your telephone
Follow the steps below to program the telephone. To stop at any time, press O. If the phone rings, program- ming stops automatically so you may answer the call.
Choose ringer sound (see note on next page)
1Press @PROG/CHAN to begin programming.
2Press ^until screen displays RINGER & setting.
3Press SELECT to change current setting:
RINGER: 1
Default setting: 1
4Press ^to display 1, 2, 3, 4, or OFF. You will hear a sample of each ringing type.
5Press SELECT to select displayed ringing type and exit.
Set date and time
1Press @PROG/CHAN to begin programming.
2Press ^until screen displays DATE/TIME.
3Press SELECT to view or change date and time:
DATE/TIME
1/01 12:00 AM
Default setting: 1/01 12:00 AM
4Press V or ^to change month, then press
SELECT.
5Repeat Step 4 to set day, hour, minute, and AM/PM.
6Press SELECT to save selection and exit.
NOTE: You can choose to set the time manually, or you can allow it to be set automatically with incoming Caller ID information. The time will be set automatically only if you subscribe to Caller ID service provided by your local telephone company (see page 5).
10