1
@TIME/SET
“Monday, 12:00 am, 2003”
“To change clock, press Time Set”
2
@TIME/SET
“Monday”
3
@CHANGE (Twice)
“Tuesday”
Press until correct day is spoken
4
@TIME/SET
“12 am”
5
@CHANGE (Twice)
“1am”
Press until correct hour is spoken
6
@TIME/SET
“00”
7
@CHANGE (Twice)
“01”
Press until correct minute is spoken
8
@TIME/SET
“2003”
9
@CHANGE (Twice)
“2004”
Press until correct year is spoken
10 
@TIME/SET
“Tuesday, 1:01 am, 2004”
Answering System Operation
Day and time announcements
To set day and time
Before playing each message, the answering system announces the day and time the message was received.
Before using the answering system, you should follow the steps at left to set the day and time, so messages are dated correctly.
The system uses voice prompts to guide you. Each time you press @CHANGE, the day, hour, minute or year advances by one. When you hear the correct setting, press @TIME/SET to move to the next setting.
To check day and time
You can press @TIME/SET at any time to hear the current day and time without changing it.
NOTE: Press @CHANGE to advance the minute or year by one digit at a time. Press and hold to advance by 10 digits at a time.
NOTE: You can choose to set the time manually, or you can allow it to be set automatically with incoming Caller ID information. The time will be set automatically only if you subscribe to Caller ID service provided by your local telephone company (see page 5).
29