CHAPTER 3: Installation
3.2 Ports on the Line Share 120H
The rear panel of the Line Share 120H includes four (4) modular ports and a power input port, as shown in Figure
1 2 3 4
FAX/
12VAC
Figure 3-1. Ports on the Line Share 120H.
1.Connect a single telephone line from a standard telephone (wall) jack to this port.
2.Connect your telephone answering device (TAD) or integrated phone/answering machine to this port. The Line Share 120H will route all calls to the TAD and PHONE ports simultaneously.
3.Depending on the installation, a single line phone, and integrated phone/answering machine, multiple phones, or a telephone system (KSU or PBX) can be connected to this port. The Line Share 120H will route all calls to the TAD and PHONE ports simultaneously.
4.The fax machine must be connected to the FAX/MODEM port to enable the Line Share 120H to automatically transfer a fax call with a fax CalliNG (CNG) tone to the fax machine. A computer modem or fax/modem can connect to this port in lieu of a fax machine.
11