Black Box 120H manual Configuration for TAD Transfer Feature Disabled

Page 14

CHAPTER 3: Installation

5.To connect a fax machine, plug the RJ-11 end of a telephone line cord into the FAX/MODEM port on the Line Share 120H.

Set your fax to answer on 1 ring.

6.To connect a telephone device such as a computer modem, in lieu of a fax machine, plug the RJ-11 end of a telephone line cord into the FAX/MODEM port on the Line Share 120H.

Set the modem to answer on 1 ring.

NOTE

The Line Share 120H has an automatic TAD Transfer feature (see Section

4.4for more information on the TAD port). To disable this feature, connect your answering machine to the PHONE port of the Line Share 120H and connect your phone to the answering machine.

1

2

3

4

FAX/

LINE-IN TAD PHONE MODEM

12VAC

Connect this line cord to the port labeled “Telephone Set” on the answering machine.

Connect this line cord to the port labeled “Telephone Line” on the answering machine.

Figure 3-4. Configuration for TAD Transfer Feature Disabled.

15

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Line Share 120H FCC Statement Industry CanadaLine Share 120H NOM Statement Trademarks Table of Contents Specifications Indicators onIntroduction Installation Unpacking the Line Share 120HPorts on the Line Share 120H Ports on the Line Share 120HPlacing the Line Share 120H Bottom of the Line Share 120HConnecting the Line Share 120H Single Phone Line/Single Phone Arrangement Configuration for TAD Transfer Feature Disabled Section Installation on a Telephone System Installation on a Telephone System Operation Fax CNG TonesStandard Operations Answering Incoming Calls Answering Calls with an Answering MachineRetrieving Answering-Machine Messages from a Remote Location Placing an Outbound Call Receiving a Computer CallLine Share 120H Troubleshooting/Helpful Hints LED doesn’t light on the Line Share 120H. What should I do?Copyright 1997. Black Box Corporation. All rights reserved
Top Page Image Contents