Black Box 120H manual Retrieving Answering-Machine Messages from a Remote Location

Page 21

LINE SHARE 120H

*To assist the Line Share 120H in automatically transferring calls that produce a CNG tone, you should leave a four-second silent period at the beginning or end of your answering machine announcement message.

To accommodate auto-dial faxes that do not produce CNG tones, the Line Share 120H monitors the line 20 seconds after a call is answered on the TAD port. If the Line Share 120H determines that a caller is not leaving a message on your answering machine during the next five-second period, the Line Share 120H transfers the call to the FAX/MODEM port.

To accommodate these timing parameters, your outgoing message should be no less than 10 seconds, and no longer than 15 seconds.

NOTE

Single-cassette answering machines are not recommended for use with the Line Share 120H because of timing limitations of these types of machines.

NOTE

If calls are being transferred to the FAX/MODEM port when a caller is leaving a message, you may want to instruct the caller (in your answering machine announcement message) to press the * key from a tone phone to leave an uninterrupted message.

4.5 Retrieving Answering-Machine Messages from a Remote Location

To disable the Line Share 120H and retrieve your answering-machine messages, follow these steps:

1.Dial your phone number and wait for the answering machine to answer the call.

2.After your answering machine answers the call, press * * on your tone phone.

3.Follow the remote-retrieval procedures for your answering machine.

4.After retrieving your messages, hang up. The Line Share 120H resets for the next call.

22

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Line Share 120H Industry Canada FCC StatementLine Share 120H NOM Statement Trademarks Table of Contents Indicators on SpecificationsIntroduction Unpacking the Line Share 120H InstallationPorts on the Line Share 120H Ports on the Line Share 120HBottom of the Line Share 120H Placing the Line Share 120HConnecting the Line Share 120H Single Phone Line/Single Phone Arrangement Configuration for TAD Transfer Feature Disabled Section Installation on a Telephone System Installation on a Telephone System Fax CNG Tones OperationStandard Operations Answering Calls with an Answering Machine Answering Incoming CallsRetrieving Answering-Machine Messages from a Remote Location Receiving a Computer Call Placing an Outbound CallLine Share 120H LED doesn’t light on the Line Share 120H. What should I do? Troubleshooting/Helpful HintsCopyright 1997. Black Box Corporation. All rights reserved
Top Page Image Contents