Black Box manual Connecting the Line Share 120H

CHAPTER 3: Installation

3.4 Connecting the Line Share 120H

This section explains how to install the Line Share 120H in most phone configurations that appear in a home or office. You can install the Line Share

120H in any one of the following phone configurations:

•a single phone line with a single phone

•a single phone line with multiple single-line phones

•a telephone system

Installation procedures for each of these configurations are provided in the following sections.

To perform the installation procedures in the following sections, you need the following equipment:

•telephone cables to connect the Line Share 120H to your telephone (wall) jack.

•extension cables—required if the connecting equipment is not located near the Line Share 120H.

•additional telephone cables—typically supplied with equipment by the manufacturer. You need additional telephone cables for as many pieces of equipment as you intend to connect to the Line Share 120H. If the equipment manufacturer does not provide the required cables, you can purchase them from your dealer.

3.4.1INSTALLATION ON A SINGLE-LINE PHONE WITH A SINGLE PHONE

Figure 3-3shows a complete installation for a single phone line/single phone arrangement. While the connections to the telephone (wall) jack may be different for other types of phone systems, the connections to the Line Share 120H remain the same for all phone configurations.

13