Heat & Glo LifeStyle EM-485TH Accessories, A. Gas Log/Lighter Provision, B. Wood Burning Inserts

Models: EM-415H EM-415 EM-485TH EM-485T

1 52
Download 52 pages 54.84 Kb
Page 40
Image 40
12 Accessories

12 Accessories

A. Gas Log/Lighter Provision

WARNING! Fire and/or Asphyxiation Risk! Use with solid wood fuel or decorative gas appliance only. Gas fire generates fumes.

DO NOT install unvented gas logs

Damper must be locked fully open when gas logs are installed

A certified gas log lighter or decorative gas log set can be installed in this fireplace.

Maximum input is 100,000 BTU/hr.

Decorative gas appliance must be certified to ANSI Z21.60 “Standard for Decorative Gas Appliances for Installation in Vented Fireplaces”.

Must be installed in accordance with the National Fuel

Gas Code, ANSI Z223.1.

A gas log set must incorporate a gas shutoff.

Gas Log set requires the damper to be locked fully open.

Knockouts are provided on both sides of the fireplace and in refractories for 1/2 in. (13 mm) iron pipe.

Seal refractory around pipe with fireplace mortar or a high temperature, noncombustible sealant.

B. Wood Burning Inserts

WARNING! Risk of Fire! Improper installation of wood in- serts may cause fireplace or chimney system to overheat.

If a wood burning insert is being installed in this fireplace, Hearth & Home Technologies recommends full reline of the chimney.

Cooling air openings at the top of the chimney must not be obstructed in any manner.

Hearth & Home Technologies recommends securing the reline at the top of the flue and using the cap certified for use with this fireplace system.

C. Install Fan

Optional.

Follow instructions included with fan kit.

WARNING! Risk of Electric Shock! DO NOT remove grounding prong from plug or route cord under or in front of appliance. Plug directly into a properly ground- ed three-prong receptacle and route cord away from appliance.

Firebox

Refractory A. Gas Log/Lighter ProvisionGas Code, ANSI Z223.1.B. Wood Burning InsertsC. Install FanManual backgroundManual backgroundManual backgroundManual background

Seal with Manual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual background fireplace mortar Manual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual background or high temp Manual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual background noncombustible Manual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual background sealant Manual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual background

Outer Shell

of Fireplace

Manual background Maintain air clearance Manual background to combustibles.

Combustible

Materials

Gas Line Manual background

Repack

Insulation

Knockout

 

 

 

 

 

 

 

 

 

 

 

1-1/2 in.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(38 mm)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Gas Line

 

 

 

 

 

air space

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Combustible materials

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

may be located at zero

 

 

 

 

 

 

 

 

 

 

 

 

clearance to gas line

 

 

 

 

 

 

 

 

 

 

 

 

beyond 4 in. (102 mm)

 

 

 

4 in.

 

 

from fireplace side.

 

 

 

 

 

 

(102 mm)

 

 

 

 

 

 

Figure 12.1 Gas Line Installation

40

Heat & Glo • EM-415, EM-485 • 33056 • Rev V • 05/08

Page 40
Image 40
Heat & Glo LifeStyle EM-485TH, EM-415 Accessories, A. Gas Log/Lighter Provision, B. Wood Burning Inserts, C. Install Fan