Heat & Glo LifeStyle EM-415H, EM-485T TS345/TS345P Square Termination Cap, TCT375 Terra Cotta Cap

•TS345/TS345P Square Termination Cap

•European Copper Series Termination Cap

Cap top comes assembled in place.

Termination Cap

Collar

2 in. (51 mm)

Minimum Height

Chase Top

Chimney

Pipe

Place waterproof sealer under each flange of the termina- tion cap and on top of each screw to help prevent leaks.

3 in. (76 mm)

Maximum

top of chase to top of

chimney section

Chase

Cap Top

(Be sure holes in cap top and

cap base are aligned.)

Cap Base

brass screw (8)

(9 for the King-Style)

bolt (8)*

Termination cap pipe and chimney section must overlap 1-1/2 in. (38 mm).

Figure 9.7 Installing a TS345/TS345P Square Termination Cap

•TCT375 Terra Cotta Cap

bracket (8)* screw (8)*

chase top

(metal or masonry)

nut (8)* washer (8)*

2 in. (51 mm) typical collar height

Place waterproof sealer under each flange of the termina- tion cap and on top of each screw to help prevent leaks.

CT-3A Adapter

SL pipe

14-1/2 in.

(368 mm)

Collar

2 in. (51 mm)

Minimum Height

Chase Top

Termination Cap

The last section of pipe must stop between 2 in. (51 mm) above top of chase and 7 in. (178 mm) below top of chase

2 in. (51 mm)

7 in. (178 mm)

Chase

Chimney

Pipe

Figure 9.9 Installing an Adapter for European Copper Cap Se- ries (CT-King shown)

Termination cap pipe and chimney section must overlap 1-1/2 in. (38 mm)

Figure 9.8 Installing a TCT375 Terra Cotta Cap

34 Heat & Glo • EM-415, EM-485 • 33056 • Rev V • 05/08