Binatone 710 manual Troubleshooting

Page 28

13. Troubleshooting

!The Spirit 710 must be serviced by trained engineers. NEVER attempt any repairs or adjustments yourself - you could make the problem worse and invalidate the Guarantee.

ALWAYS check „ you have followed the steps listed in Section 2 to

first that: install and set up your Spirit 710.

„all connectors are firmly inserted in their sockets.

„mains power is switched on at the socket.

Everyday use

“I cannot make or Make sure you’re using the telephone line cable that

answer calls.” was supplied with your Spirit 710. Other telephone line cables might not work.

Switch off power at the mains socket, wait for a few seconds and then switch back on. This may solve the problem.

“The phone does

 

Make sure you’re using the telephone line cable

not ring”

 

that was supplied with your Spirit 710. Other

 

 

 

telephone line cables might not work.

 

 

 

 

 

 

 

Set the ringer volume to High, using the switch at

 

 

 

the back of the unit.

 

 

 

Check that the total REN value of all equipment

 

 

 

connected to your telephone line is not more than

 

 

 

4. Disconnect one or more telephones.

“The phone does

 

Make sure you’re using the telephone line cable

not dial”

 

that was supplied with your Spirit 710. Other

 

 

 

telephone line cables might not work.

 

 

 

 

“The Caller

 

You need to subscribe to Caller Display service from

Display feature

 

your local telephone company. Contact the local

isn’t working.”

 

telephone lcompany for details on how to subscribe.

 

 

 

 

 

 

 

The caller may have withheld their number by

 

 

 

dialing 141. Or they may be calling from a network

 

 

 

that does not transmit the Caller Display (for

 

 

 

example, it may be an international call).

Binatone Help Line - 0845 345 9677 Calls are charged at Local Call rate.

28

Image 28
Contents Spirit Microphone For EXIT/ Answer ON/OFFEntry with Installation Locating the Base unitPlace the Handset on the Base unit Or extension socketDesk/Wall mount installation Desk Mount Wall MountDesk/Wall mounting continue SET LanguageSET Time DateSET Flash Setting up continueTime Press Menu button to confirm the Message Length setting LCD Contrast Message Length Rings to AnswerRemote Access TAM HD 1 ON/OFF setting Ringer volume To make a CallTelephone Operation Dial the telephone numberOne Touch Memory Telephone operation continueOutgoing call record One Touch Memory Operation ContinueDial out Stored memory Number OutgoingPhonebook Outgoing call record continueStoring an Outgoing Call record Into Phonebook MemoryTo add a Phonebook continueNew record Press the Phonebook button to save the edited record Caller Display operation To delete a Record from MemoryCaller Display operation continue Press and hold the Delete button Press the Delete buttonPress the Delete button to confirm Answering Machine system MessagesOGM To play the currentAnswering Machine System continue To playback your message/s To record a memoPlayback 1 and Pause EXIT/ON-OFF button During message playback, press the Delete buttonTo delete all 1 messages To go back to the default Remote operationTo check Your RemoteRemote operation continue To checkFrom a RemoteUsing Switching On fromInstruction CodeOperational notes Electrical safety„ Never use your Spirit 710 outdoors during a thunderstorm Troubleshooting Troubleshooting continue If the fault persists … Technical details Declaration of conformityContents of this User Guide 0845 345