Troubleshooting continue...
Be sure to wait until the second ring before answering.
|
| Answering Machine | ||
|
|
|
|
|
“The machine | The machine’s memory may be full. You need to delete | |||
won’t record | enough recorded messages to free at least one minute | |||
any messages” | recording time. Or you can delete all recorded messages | |||
|
| to make room for new ones |
| |
|
| Make sure the machine is switched on - the | ||
|
| MESSAGE light should be on. | ||
|
|
|
| |
|
| Make sure you have not selected OGM2 - with OGM2 |
| |
|
| selected, callers cannot leave messages (see page 20). | ||
|
|
|
|
|
| “Remote | Make sure you are using the correct remote security code | ||
operation | ||||
doesn’t work.” | . |
|
| |
|
|
|
| |
|
| Check that you are using a suitable | ||
|
| Some cordless or mobile phones do not generate | ||
|
| continuous tones and so are not ideal for remote operation. | ||
|
| Don’t leave more than 10 seconds between key |
| |
|
| presses; otherwise, your call will be cut off. | ||
“Last Number Redialand/or memory dialing don’t work on a PBX.
Using your Spirit 710 on a PBX
When you first make a call, try pressing the REDIAL/ PAUSE button for a pause between the outside line access digit (e.g. 9) and the telephone number.
You should later be able to redial the number.
When storing numbers in memory, you can include the outside line access digit (e.g. 9) with each number.
If your PBX requires you to wait for a second Dial tone before dialing the telephone number, press the REDIAL/PAUSE button for a pause between the access digit and the number.
Binatone Help Line - 0845 345 9677 Calls are charged at Local Call rate. 29